Spectrum Remote Code Lookup Tool

Code Entry Instructions

For URC1160 (SR-002-R or Guide remote)

1. Press and hold the MENU and OK buttons until the INPUT button blinks twice.
2. Enter the first 5-digit code for your brand. The INPUT button will blink twice.
3. Test the volume and power functions. If the device responds correctly, the setup is complete. If not, try the next code for your brand.

For URC1160 (or 1060BC2/1060BC3), M2067BX3

1. Press a device button (e.g., TV, DVD, etc.), then press and hold SETUP until the selected key blinks twice.
2. Enter the first 5-digit code for your brand. If accepted, the selected key will blink twice.
3. Press POWER (or Play). The device should turn off (or start playing). If it doesn’t, repeat the steps with the next code until it works.

For URC2060, Atlas 5 DVR/PVR, M1056, M2057, URC2068/2069

1. Turn on your device and, if applicable, insert video media (DVD, Blu-ray, etc.).
2. Press a device button (e.g., TV, DVD, etc.), then press and hold SETUP until the selected button blinks twice.
3. Enter the first 4-digit code for your brand. If accepted, the selected button will blink twice.
4. Press POWER (or Play). The device should turn off (or start playing). If it doesn’t, repeat the steps with the next code until it works.

For Remotes with 3-Digit Codes

1. Press the device button (e.g., TV, DVD) and OK/SEL together for 3 seconds. The device LED will turn on, indicating it’s ready to be programmed. The LED will stay on for 20-30 seconds, so move quickly to the next step.
2. Enter the 3-digit code for your brand. If there are multiple codes, start from the first one and try each one until the device turns off.
3. Press the same device button again to save the code. The LED will blink twice to confirm the code is stored.

If you find any code that is missing, incorrect, outdated, or incomplete, you can report it here.