One For All Universal Remote Codes
Find device codes to program One For All universal remote controls. Our code lookup tool provides 4-digit codes for Smart Control Pro, Smart Control, Evolve, Essence, Essential, Contour, Simple series remotes and 5-digit codes for TV Zapper, Zapper+, and Streamer remotes.
One For All Remote Code Lookup Tool
Select your code type, device category and brand name to look up the codes for your One For All remote.
Your Device Code(s)
Codes come from multiple sources, so only some will work with your model. Try each one to find one with the best functionality.
How to Program One For All Universal Remote With Codes? (Set Up by Code)
To program a One For All universal remote with codes, follow the steps below for your specific remote model.
-
Press and Hold the MAGIC Key
Press and hold the MAGIC key until the LED under the current device blinks twice, confirming that the remote has entered programming mode. The LED under the current mode key stays lit during this step.
-
Press the DEVICES/MODE Key to Select Your Device
Press the DEVICES/MODE key repeatedly until the LED for the device you want to program is lit. For single device remotes, such as Evolve TV, skip this step.
-
Enter the 4 Digit Code for Your Brand
Enter the first 4 digit code listed for your device brand. The LED blinks twice and then turns off to confirm that the code has been entered.
-
Press the POWER Key to Test the Remote
Point the remote at your device and press the POWER key. The remote is ready to use if the device turns off.
-
Press the Device Button Corresponding to Your Device Type
Skip this step if you are programming single-device remotes such as Contour TV or Essential TV.
-
Press and Hold the SETUP Button
Hold down the button until the remote's LED blinks twice. Some remotes like OFA 8 and Slim Line have a MAGIC button instead of the SETUP button.
-
Enter the 4-Digit Code for Your Device
Use the number button to enter the code. The remote's LED will blink twice once the last digit is entered.
-
Test the Remote
Aim the remote at your device and press the POWER button. Your remote is programmed and ready to control the device if the device turns off. Repeat the steps with the next code listed for your device if it does not turn off. Press the PLAY or PAUSE buttons if you are setting up the remote for a streaming box and check if it responds correctly.
-
Press and Hold the Colored Button Combination
Press and hold the RED and BLUE buttons simultaneously to set up a TV, or the GREEN and YELLOW buttons to set up a SAT/Cable/Set-Top Box, until the LED blinks twice.
-
Enter a 4-Digit Device Code for Your Device
Use the number key pad to enter the digits.
-
Test the Remote
Aim the remote at your device and press the POWER button. If it turns off, your remote is programmed. If not, repeat the steps with the next code listed for your device.
-
Press and Hold the SETUP button
Wait 3 seconds, then release the button when the LED blinks twice.
-
Press the Device Button
Press the button corresponding to the device you want to control. For example, TV.
-
Enter the 4-Digit Code
Use the numeric keypad to enter the digits of the code.
-
Test the Remote
Aim the remote at your device and press the POWER button. If it turns off, your remote is programmed. If not, repeat the steps with the next code listed for your device.
-
Press and Hold the Button Combination to Select your Device
For TV, press and hold TV POWER and STB POWER buttons. For STB, press and hold VOLUME+ and VOLUME- buttons. For audio devices, press and hold CHANNEL+ and CHANNEL- buttons. Release the button when the LED blinks twice.
-
Enter the 5-Digit Code for your Device
Press TV POWER for 1, STB POWER for 2, VOLUME + for 3, CHANNEL + for 4, VOLUME – for 5, and CHANNEL – for 6. For example, to enter the code 31425, press VOLUME + (3), TV POWER (1), CHANNEL + (4), STB POWER (2), and VOLUME + (5).
-
Test the Remote
Aim the remote at your device and press the POWER button. Press the MUTE button if you already set up an STB and now setting up an audio device. Repeat the steps with the next available code if your device does not respond correctly.
-
Turn on the Device You Wish to Control
Make sure the device is not on standby.
-
Press and Hold the Button Combination to Select your Device
For TV, press and hold TV POWER and STB POWER buttons. For STB, press and hold VOLUME+ and CHANNEL+ buttons. For audio devices, press and hold VOLUME- and CHANNEL- buttons. Release the button when the LED blinks twice.
-
Enter the 4-Digit Code for Your Device
Use the number buttons to enter the digits. The LED will blink twice.
-
Test the Remote
Press the commonly used function button on the remote and check if the device respond correctly. For example, press the POWER button and check if the device properly turn off. Repeat the steps 2 and 3 if it does not respond correctly.
-
Switch on the Device You Want to Operate.
Make sure the device is not on standby mode.
-
Press and Hold the Button Combination to Select your Device
For TV, press and hold the TV POWER and Back buttons. For Streamers, press and hold the STREAMER POWER and HOME buttons. For audio devices, press and hold the VOLUME+ and VOLUME− buttons. Release the buttons when the LED under the ring blinks twice in the corresponding color: yellow for TV, red for Streamers, and green for audio devices.
-
Enter the 5-Digit Code for Your Device
Since the remote does not have number buttons, press TV POWER for digit 1, STREAMER POWER for digit 2, Back (←) for digit 3, Home (⌂) for digit 4, Replay (⟲) for digit 5, and Options (*) for digit 6. The green LED will blink twice. For example, to enter the code 32145, press these buttons in order: Back (←), STREAMER POWER, TV POWER, Home (⌂), and finally Replay (⟲).
-
Test the Remote
Aim the remote at your device, press the POWER button and check if the device turns off. Repeat the steps with the next code for your device if the device does not turn off.
How to Enter One For All Remote Codes Manually? (Video Tutorial)
Watch the video below to learn how to enter One For All remote codes manually using the Set Up by Code method.
What Should I Do If the Remote Codes Do Not Work?
You should try another programming method, such as SimpleSet Search, Manual Code Search, or Infrared Learning, if the listed remote codes do not work or no code is available for your device. These methods let you program your One For All remote without manually entering a code. See our detailed guide on how to program One For All universal remote without codes.
